Other Markets
Club Sound Concert Sound
 
Home | Products | Catalogues | Events | Installations | Contacts
IT | EN

PUBLIC ADDRESS SERIES
COMMERCIAL SOUND


Amplifiers
- Digital Power Amplifiers
- Modular Digital Amplifiers
- Power Units

Mixers and Amplifiers Mixers
- Evolution Series
- Advance Series
- Basic Series
- 9000 Series
- Induction Loop Amplifiers
- Wall Series

Paging Systems
- Comunication Series
- Voice Message Recorder

Evacuation System
- Secure System EN60849

Advanced Sound Processors

- Digital Matrix Mixers
- High Precision Series
- Professional Automatic Mixer
- Antilarsen

Speaker Systems
- Column Speakers
- Wall Speakers
- Wall Infitted Speakers
- Celiling Speakers
- Sound Projectors
- Horn Speakers
__________________________
- Accessories
__________________________

PROFESSIONAL SOUND


Amplifiers

- Digital Technology Amplifiers
- High Definition Amplifiers
- XT Series
- Professional Series

Professional Sound Processor
- Stereo Graphic Equalizers
- Electronic Limiters
- Digital Processors
- Stereo Crossovers

Professional Speakers
- XTE500
- XTE700
- Forty Series

XT Series

Description
The XT amplifiers, which are a catalogue item available in three models with varying power, were designed for the specific requirements of the professional audio field, in keeping with the highest standards of reliability and functionality regarding their use. All three models are equipped with an internal 24 bit Digital Sound Processor (DSP) which has dynamic range of up to 116 dB, allowing the remote control of all of the controlled speakers’ sound parameters from a PC, such as the eight band equalization with complete parameters, the limiter function, the compressor, the delay control, etc… By connecting a personal computer to a serial port the amplifier can be “programmed” to ensure the best possible adaptability of the speaker to its intended use.
 

XT2000 / XT2600 / XT3400
Zoom +


Main Features
. 24-bit processor with built-in DSP and dynamic range up 116dB, A/D, D/A ratio
. 20 user programmable memories
. Matrix control up to 255 units, controlled by selecting the address code
. Three PEQ equalisation bands, limiter (threshold, adjustable release and attack times), delay
(ax 8ms), phase reversal
. HPF LPF cross-over filters: 20Hz – 20KHz. Adjustable cross-over frequency. Slopes 6, 12, 18, 24, 48 dB
. 2 X 20 LCD rear-lit display
. Full protections
. Output stage based on Class AB topology
. Low noise and lower distorsion


Downloads
Manual
Datasheet
Configuration

Technical Specification

Models
XT 2000
XT 2600
Output Power 4 Ohm
2x1000 WRMS
2x1300 WRMS
Output Power 8 Ohm
2x650 WRMS
2x850 WRMS
Frequency Response
20Hz÷20KHz ± 0,5 dB
Damping factor
> 500:1 @ 1 kHz / 8 Ohm
SNR
> 90 dB
Power Requirements
AC 230V - 50÷60Hz
Dimension (WxHxD)
483x132x495 mm
Weight - Net
32,5Kg
32,5Kg

Models
XT3400
Output Power 4 Ohm
2x1700 WRMS
Output Power 8 Ohm
2x1000 WRMS
Frequency Response
20Hz÷20KHz ± 0,5 dB
Damping factor
> 500:1 @ 1000 Hz / 8 Ohm
SNR
> 90 dB
Power Requirements
AC 230V - 50÷60Hz
Dimension (WxHxD)
483x132x495 mm
Weight - Net
33,5Kg