|
XT DSP Series
Description
The XT DSP Series amplifiers were designed for the specific requirements of the professional audio field, in keeping with the highest standards of reliability and functionality regarding their use. All three models are equipped with an internal 24 bit Digital Sound Processor (DSP) which has dynamic range of up to 116 dB, allowing the remote control of all of the controlled speakers’ sound parameters from a PC, such as the three band equalization with complete parameters, the limiter function, the compressor, the delay control, etc…
|
|
XT2000 / XT2600 / XT3400
Zoom +
|
|
|
Features
. Class AB full electronic protected.
. Low noise and lower distorsion.
. Mono, stereo mode.
. Built-in 24 bit DSP, 48KHz sampling rate A/D D/A, dinamic range up to 116dB.
. 2x20 LCD display with backlight.
. PC network control up to 255 units.
. Save and recall setup, 20 memories.
. Full parameters PC software control:
|
|
 |
Technical Specification
Models |
XT 2000 |
XT 2600 |
Power Output into 4 Ohm |
2x1000 WRMS |
2x1300 WRMS |
Power Output into 8 Ohm |
2x650 WRMS |
2x850 WRMS |
Frequency Response |
20Hz÷20KHz ± 0,5 dB |
Damping factor |
> 500:1 @ 1 kHz / 8 Ohm |
SNR |
> 90 dB |
Power Requirements |
AC 230V - 50÷60Hz |
Dimension (WxHxD) |
483x132x495 mm |
Weight - Net |
34Kg |
36Kg |
Models |
XT3400 |
Power Output into 4 Ohm |
2x1700 WRMS |
Power Output into 8 Ohm |
2x1000 WRMS |
Frequency Response |
20Hz÷20KHz ± 0,5 dB |
Damping factor |
> 500:1 @ 1000 Hz / 8 Ohm |
SNR |
> 90 dB |
Power Requirements |
AC 230V - 50÷60Hz |
Dimension (WxHxD) |
483x132x495 mm |
Weight - Net |
38Kg |
|
|
|