Digital Technology Amplifier Series
Description
The XT Series amplifiers were designed for the specific requirements of the professional audio field, in keeping with the highest standards of reliability and functionality regarding their use. All three models are equipped with an internal 24 bit Digital Sound Processor (DSP) which has dynamic range of up to 116 dB, allowing the remote control of all of the controlled speakers’ sound parameters from a PC, such as the three band equalization with complete parameters, the limiter function, the compressor, the delay control, etc… |
|
XT2000 / XT2600 / XT3400
Zoom +
|
|
Features
. Class AB full electronic protected.
. Low noise and lower distorsion.
. Mono, stereo mode.
. Built-in 24 bit DSP, 48KHz sampling rate A/D D/A, dinamic range up to 116dB.
. 2x20 LCD display with backlight.
. PC network control up to 255 units.
. Save and recall setup, 20 memories.
. Full parameters PC software control:
|
 Downloads
Manual
Datasheet
Configuration
|
 |
Technical Specification
| |
XTE2000
|
XT2600 |
XT3400 |
Output Power @ 4 ohm |
2x1000W
|
2x1300W |
2x1700W |
| Output Power @ 8 ohm |
2x650W
|
2x850W |
2x1000W |
Frequency Response
(±0,5dB) |
20÷20k |
Damping factor
@ 1 kHz / 8Ohm |
>500:1 |
SNR |
>90dB |
| Power Requirements |
AC 230V 50÷60Hz |
| Dimension (WxHxD) |
483x132x487mm |
| Weight - Net |
32,5Kg |
33,5Kg |
|
|
